MH20i
MH20i (Manual Indexable Probe Head)
The MH20i probe offers repeatable manual indexing of the probe head from 0° to 90° in the A axis and through 360° in the B axis with a lever locks the head in one of up to 168 repeatable positions, set at 15° increments. Ideal for manual CMMs, it can also be used on CNC models, but will require intervention from the operator whenever indexing is required. The MH20i uses a TP20 stylus module, which in turn accepts the M2 range of styli.
TP20 Stylus Module
The MH20i probe offers repeatable manual indexing of the probe head from 0° to 90° in the A axis and through 360° in the B axis with a lever locks the head in one of up to 168 repeatable positions, set at 15° increments. Ideal for manual CMMs, it can also be used on CNC models, but will require intervention from the operator whenever indexing is required. The MH20i uses a TP20 stylus module, which in turn accepts the M2 range of styli.
Length | 61 mm |
Diameter | 48 mm |
Weight | 210 g |
Probe mounting | TP20 kinematic mount |
Head mounting | MS range of shanks |
Suitable interface | PI 200-3 |
Number of probe sockets | 1 |
Probe status indication | 1 LED |
Cable connection | 5 pin DIN 180º socket |
A-axis indexing | 0° to 90° in 15° repeatable steps |
B-axis indexing | 180° in 15° repeatable steps |
Repeatability of position |
1.5 µm (0.00006 in) (TP20 and 10 mm stylus fitted) 2.5 µm (0.0001 in) (EM2 extended module and 10 mm stylus) |
Maximum extension bar | EM2 extension module - 75 mm (2.95 in) |
TP20 Stylus Module
Module | Application | Trigger forces* | Stylus lengths | |
---|---|---|---|---|
SF- Standard force |
|
Suited to the majority of applications |
XY: 0.08 N Z: 0.75 N Stylus: 10 mm |
10 mm to 50 mm GF |